Gas Safe Boiler Engineers
Please jump to the required sections using the links below.
R&B are Gas Safe Boiler Engineers and can provide all domestic plumbing and heating services for residential clients. We undertake boiler fitting, boiler servicing and all gas safety checks and Gas Safety Certificates for residential customers and landlords.
R&B are fully Gas Safe Registered Plumbers and Heating Engineers and can install, maintain and service your gas boiler, central heating system and all gas appliances in your home. We can also undertake all the electrical works required to wire up your boiler controls and thermostats.
Gas Boiler Replacement
- Gas Boiler Replacements
- New Gas Boiler Fitting
- Combi-Boiler Replacement
- Gas Boiler Exchange
- New Boiler Installations
- Combi-Boiler Fitting
- Central Heating Installation & Servicing
R&B gas boiler engineers are Gas Safe Registered to install a wide range of domestic and commercial gas boilers.
We can carry out all gas boiler works required from design, installation and commissioning, to allied electrical works and testing. As Gas Safe registered engineers we can install a full new gas fired central heating system, replace your existing boiler, or undertake annual servicing and repair. R&B gas engineers are always available to provide the very best advice in accordance with industry guidelines and standards.
Gas Boiler Service
A gas boiler is an essential part of most modern homes so it is important that it is maintained and serviced regularly. A boiler service should involve an annual inspection of the key boiler components by a Gas Safe registered engineer and is best done in late summer before the central heating is switched on. That way you can be confident that the heating is ready to go when you need it most. R&B boiler engineers are busy with repairs and new installations when the weather turns cold in the autumn, so don’t leave it until the last minute before booking a boiler service.
Why should I get my boiler serviced?
Most manufacturers recommend an annual boiler service to allow the safe and efficient operation of your system.
What does a gas boiler service involve?
An R&B annual boiler service normally involves four key elements:
- a gas safety check to ensure the boiler is safe to operate
- a visual inspection of some components to ensure they are in good condition (including burners, heat exchanger, seals, electrodes, the condensate trap)
- cleaning of components like the burner, heat exchanger and condensate trap to ensure efficient boiler operation
- testing for leaks and flue outlet Carbon Monoxide and Carbon Dioxide levels (Co and CO2)
The specific details of the boiler service are found in the boiler’s installation and servicing instructions which should be kept close to your boiler.
Tip: Turn the boiler off 30 minutes before the R&B service engineer arrives so that the boiler is cool when he services it. Otherwise he will have to wait for it to cool down before servicing it.
As well as the boiler itself, the R&B boiler engineer will inspect other elements of the central heating system to ensure that they are operating fully. This includes checking expansion tanks on high pressure systems. It is also a good idea to have any TRV’s (Thermostatic Radiator Valves) checked to ensure they are not sticking. If you do not have TRV’s fitted then the R&B annual boiler service is a good opportunity to have them installed.
Nowadays it is also considered wise to have a carbon monoxide alarm fitted near the boiler. A boiler service is a good time to fit one.
Annual Boiler Check
An annual service with incidental repairs from an R&B Gas Safe registered heating engineer should work out cheaper than a breakdown contract, which we can also offer. Many new boilers have a 5, 7 or even 10 year warranty.
You should get your boiler serviced regularly to make sure it’s working properly. A faulty boiler could waste you money on energy and might even start leaking poisonous carbon monoxide. Because the gas is colourless and scentless, it’s hard to tell if one of your appliances starts leaking carbon monoxide – so you should get them serviced by a Gas Safe Registered engineer once a year.
- We will inspect your boiler and controls to make sure they’re working properly.
- We will check your boiler for corrosion and leaks.
- We will take off the casing of your boiler to inspect the main components.
- We will check the gas pressure.
- We will test the flue to make sure it’s not emitting any unsafe fumes.
- We will clean the parts if tests indicate they need it.
- We will pop the casing back on and check the seals.
- We will leave you with a checklist of information about your boiler’s safety.
All our engineers are on the Gas Safe Register
You can trust R&B to service your boiler properly. Our engineers are approved by the Gas Safe Register, the UK’s official registration body designed to protect the public against unqualified engineers and unsafe gas work.
Please request a quotation using the webform below, with a brief description of the work required, and we will get back to you as soon as we can. Thank you
Gas Boiler Replacement, Servicing & Repair
R&B M&E Ltd
Gas Boiler Replacement, Servicing & Repair
Building 7, Devonshire Works, Pitt Street
Keighley, West Yorkshire
BD21 4PF
GB
mail@rnb-mne.co.uk
Phone: 01535 687010
